Discussion of dislocation phenomena of resistance and load in formula for stability safety factor
FU Wen-guang1,2,3, CHEN Shuang2, WANG Zhen-wei2
1. Tianjin University School of Civil Engineering, Tianjin 300350, China; 2. Shenzhen GongKan Geotechnical Group Co., LTD, Shenzhen 518063, China; 3. Guangdong Engineering and Technology Research Center for Geotechnique and Underground Space, Shenzhen 518063, China
Abstract:The stability safety factor of geotechnical structure shall be the sum of resistance divided by the sum of loads. There are five kinds of dislocation phenomena between resistance and load in the formula for calculating the stability safety factor in the worldwide relevant standards, and they are inconsistent with the definition of safety factor. (1) The anti-sliding force produced by some soil strips in the slice method is included in the denominator, and the first type of dislocation will be formed if it minuses the sliding force. The second type of dislocation will be formed if it pluses the sliding force. If the tangential component of anchor resistance is placed in the denominator to minus the sliding force, the first type of dislocation will be formed as well. (2) The third type of dislocation will be formed if water pressures and other pressures are placed in the numerator and subtracted from the resistance, and when the third type works together with the first and second types respectively, they result in the fourth and fifth types. (3) The first and third types result in a virtual height of safety factor calculation, which leads to insufficient safety in engineering sometimes. The second type results in a virtual lower safety factor, which may lead to great waste. The fourth and fifth types increase the uncertainty of calculated results, and the fourth kind will further cause the virtual height of safety factor. (4) These dislocated formulas can be modified and generalized into a unified formula.
付文光, 陈双, 王振威. 稳定安全系数计算公式中荷载与抗力错位影响探讨[J]. 岩土工程学报, 2021, 43(3): 556-563.
FU Wen-guang, CHEN Shuang, WANG Zhen-wei. Discussion of dislocation phenomena of resistance and load in formula for stability safety factor. Chinese J. Geot. Eng., 2021, 43(3): 556-563.
[1] 建筑结构可靠度设计统一标准:GB 50068—2018[S]. 2018. (Unified Standard for Reliability Design of Building Structures:GB 50068—2018[S]. 2018. (in Chinese)) [2] 工程结构可靠性设计统一标准:GB 50153—2008[S]. 2008. (Unified Standard for Reliability Design of Engineering Structures:GB 50153—2008[S]. 2008. (in Chinese)) [3] GEOFFREY G.Meyerhof. Development of geotechnical limit state design[J]. Canadian Geotechnical Journal, 1995, 32(1): 128-136. [4] 建筑边坡工程技术规范:GB 50330—2013[S]. 2013. (Technical Code for Building Slope Engineering: GB50330—2013[S]. 2013. (in Chinese)). [5] 岩土锚杆与喷射混凝土支护工程技术规范:GB 50086—2015[S]. 2015. (Technical Code for Engineering of Ground Anchorages and Shotcrete Support: GB50086—2015[S]. 2015. (in Chinese)). [6] 建筑基坑支护技术规程:JGJ 120—2012[S]. 2012. (Technical Specification for Retaining and Protection of Building Foundation Excavations:JGJ 120—2012[S]. 2012. (in Chinese)) [7] LAZARTE C A, ROBINSON H, GÓMEZ J E, et al. Soil Nail Walls Reference Manual: FHWA-NHI-14-007[M]. Woodbury: Ryan R Berg & Associates, Inc, 2015 [8] Code of Practice for Strengthered/Reinforced SoilsPart 2: BS 8006—2:2011[S]. 2011. [9] 建筑地基基础设计规范:GB 50007—2011[S]. 2011. (Code for Design of Building Foundation:GB 50007—2011[S]. 2011. (in Chinese)) [10] 高压喷射扩大头锚杆技术规程:JGJ/T 282—2012[S]. 2012. (Technical Specification for Underreamed Anchor by Jet Grouting:JGJ/T 282—2012[S]. 2012. (in Chinese)) [11] 公路加筋土工程规范:JTJ 015—91[S]. 1999. (Specification for Design of Highway Reinvorced Eeath Engineering:JTJ 015—91[S]. 1999. (in Chinese)) [12] 郑颖人, 陈祖煜, 王恭先, 等. 边坡与滑坡工程治理[M]. 2版. 北京: 人民交通出版社, 2010. (ZHENG Ying-ren, CHEN Zu-yu, WANG Gong-xian, et al.Engineering Treatment of Slope & Landslide[M]. 2nd ed. Beijing: China Communication Press, 2010. (in Chinese))