Experimental study on bearing mechanism of screw cast-in-place piles under vertical loads
WANG Shu-guang1,2, FENG Zhe3, TANG Jian-zhong1, ZHAO Zhi-peng1
1. Institute of Foundation Engineering, China Academy of Building Research, Beijing 100013, China;
2. Disaster Prevention Research Center, Ministry of Housing and Urban-Rural Development, Beijing 100013, China;
3. State Grid Sichuan Construction Company, Chengdu 610052, China
The screw cast-in-place pile is a kind of variable-section cast-in-place pile with cylindrical top and threaded bottom. Due to its special construction technology and section form, the bearing mechanism of screw piles is different from that of piles with the same section. Through the indoor model tests, the failure modes of the screw piles and the straight rod piles are obtained intuitively by using the image processing technology, and then the bearing mechanism and the calculation of the bearing capacity are discussed, and the field tests are used for verifiction. The model and field tests show that the bearing capacity of a single screw pile is higher than that of the pile with the same diameter, and the lateral resistance of the screw pile is obviously higher than that of the pile with the same diameter. The mechanism of limit lateral resistance is different between the screw segment and the straight segment. For the screw section, under the limit state, because of the teeth of mechanical interlocking between the teeth and the teeth of the soils as a whole and the shear displacement of surrounding soils, the lateral resistance is shear strength of surrounding soils, the fracture surface is continuously arch-shaped, and the average diameter of the arch section is higher than the diameter of the screw teeth. For the straight pile, under the limit state, the lateral resistance is the friction resistance between the pile body and the soils around the pile, and the failure surface is the cylinder around the pile. According to the test results, the expression for the ultimate bearing capacity of a single screw cast-in-place pile is given, and the value of the relevant parameters are suggested.
[1] 孟振, 陈锦剑, 王建华, 等. 砂土中螺纹桩承载特性的模型试验研究[J]. 岩土力学, 2012, 33(增刊1): 141-145.
(MENG Zhen, CHEN Jin-jian, WANG Jian-hua, et al.Study of model test on bearing capacity of screw piles in sand[J]. Rock and Soil Mechanics, 2012, 32(S1): 141-145. (in Chinese))
[2] 钱建固, 陈宏伟, 贾鹏, 等. 注浆成型螺纹桩接触面特性试验研究[J]. 岩石力学与工程学报, 2013, 32(9): 1744-1749.
(QIAN Jian-gu, CHEN Hong-wei, JIA Peng, et al.Experimental study of mechanical behaviors of grouting- screw pile interface[J]. Chinese Journal of Rock Mechanics and Engineering, 2013, 32(9): 1744-1749. (in Chinese))
[3] 方崇, 张信贵, 彭桂皎. 对新型螺杆灌注桩的受力特征与破坏性状的探讨[J]. 岩土工程技术, 2006, 20(6): 316-319.
(FANG Chong, ZHANG Xin-gui, PENG Gui-jiao.Discussion on the bearing force characteristic and the failure behavior of a new kind half-screw filling pile[J]. Geotechnical Engineering Technique, 2006, 20(6): 316-319. (in Chinese))
[4] 高建中, 张瑞松. 湿陷性黄土地区螺杆桩承载力静载试验研究[J]. 岩土工程技术, 2017, 31(3): 109-114.
(GAO Jian-zhong, ZHANG Rui-song.Experimental study on static load bearing capacity of screw piles in collapsible loess area[J]. Geotechnical Engineering Technique, 2017, 31(3): 109-114. (in Chinese))
[5] 彭奎森, 马石城. 竖向荷载作用下螺杆桩荷载沉降函数解及有限元分析[J]. 湖南工程学院学报, 2010, 20(3): 67-71.
(PENG Kui-sen, MA Shi-cheng.Solution of load-settlement function an finite element analysis of single screw stake under axial pressure[J]. Journal of Hunan Institute of Engineering, 2010, 20(3): 67-71. (in Chinese))
[6] 杨启安, 沈保汉. 螺纹桩承载机理及承载力计算方法[J]. 工业建筑, 2013, 43(1): 67-70.
(YANG Qian, SHEN Bao-han.The bearing mechanism and calculation method of bearing capacity of screw pile[J]. Industrial Construction, 2013, 43(1): 67-70. (in Chinese))
[7] 邓益兵, 周健, 刘钟, 等. 砂土中螺旋挤扩钻具下旋成孔过程的模型试验研究[J]. 岩石力学与工程学报, 2011, 30(12): 2558-2566.
(DENG Yi-bing, ZHOU Jian, LIU Zhong, et al.Model test study of augered piling of screw displacement auger in sand[J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(12): 2558-2566. (in Chinese))
[8] 冯浙. 螺杆灌注桩竖向承载机理的试验研究[D]. 北京:中国建筑科学研究院, 2019.
(FENG Zhe.Experimental Study on Vertical Bearing Characteristics of Screw Cast-in-Place Pile[D]. Beijing: China Academy of Building Research, 2019. (in Chinese))
[9] RANDOLPH M F, DOLWIN J B.Design of driven pile in sand[J]. Géotechnique, 1994, 44(3): 427-448.
[10] TOMLINSON M J.Pile Design and Construction Practice[M]. London: E&FN Spon, 1977.