Abstract:Through the indoor small scale model tests, the optimal burial depth position and disc spacing of the bearing plate of the rotary excavated squeezed cast-in-situ piles are further determined, which provides the necessary basis for its application. In the silty clay layer, the 30 mm-pile diameter rotary excavation and expansion cast-in-situ pile is researched by the pull-up load. At the same time, an equal-diameter pile is set as a control group. The Q-s curve and the S-lgt curve of the equal-diameter pile and the spin-expansion and expansion-expansion pile are obtained under uplift load. The results show that both in terms of the uplift capacity and the anti-pull capacity, the rotary excavation squeezed cast-in-place piles are better than the equal-diameter ones, and the pull-out bearing capacity of the single pile is about 1.5~2.3 times that of the pile with the same diameter. In order to make sure that the bearing plate resistance is fully exerted, the bearing plate depth of the single plate pile is at least 6 times the pile diameter while that of the double-disc pile is at least 5 times the pile diameter.
[1] 钱德玲. 支盘桩抗压和抗拔特性的研究[J]. 岩土力学, 2003, 24(增刊): 517-520. (QIAN De-ling.A study of compression and extraction resistance behavior of squeezed supporting disk pile[J]. Rock and Soil Mechanics, 2003, 24(S0): 517-520. (in Chinese)) [2] 朱炎兵, 雷祟. 等截面抗拔桩在地铁车站抗浮中的应用[J]. 铁道勘测与设计, 2007(5): 94-98. (ZHU Yan-bing, LEI Chong.Application of equal section uplift pile in anti-flouting of subway station[J]. Railway Survey and Design, 2007(5): 94-98. (in Chinese)) [3] 卢成原, 孟凡丽, 王章杰, 等. 非饱和粉质黏土模型支盘桩试验研究[J]. 岩土工程学报, 2004, 26(4): 522-525. (LU Cheng-yuan, MENG Fan-li, WANG Zhang-jie, et al.Test of model piles with branch plates in unsaturated silt clay[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(4): 522-525. (in Chinese)) [4] 卢成原, 孟凡丽, 吴坚, 等. 不同土层对支盘桩荷载传递影响的模型试验研究[J]. 岩石力学与工程学报, 2004, 23(20): 3547-3551. (LU Cheng-yuan, MENG Fan-li, WU Jian, et al.Testing study on effect of different soil layers on load transfer of model piles with branch plates[J]. Chinese Journal of Rock Mechanics and Engineering, 2004, 23(20): 3547-3551. (in Chinese)) [5] 张宝钿, 卢成原. 支盘桩的抗拔机理及工程应用[J].建筑技术, 2009, 40(9): 843-846. (ZHANG Bao-dian, LU Cheng-yuan.Study on uplift mechanism and engineering application of disk pile[J]. Architecture Technology, 2009, 40(9): 843-846. (in Chinese)) [6] 陈轮, 常冬冬, 李广信. DX桩单桩承载力的有限元分析[J]. 工程力学, 2002, 19(6): 67-72. (CHEN Lun, CHANG Dong-dong, LI Guang-xin.Finite element analysis of bearing capacity of a single DX pile[J]. Engineering Mechanics, 2002, 19(6): 67-72. (in Chinese)) [7] 高笑娟, 朱向荣. 用双曲线法预测挤扩支盘桩的极限承载力[J].岩土力学, 2006, 27(9): 1596-1600. (GAO Xiao-juan, ZHU Xiang-rong.Forecasting ultimate bearing capacity of single squeezed branch pile by hyperbola method[J]. Rock and Soil Mechanics, 2006, 27(9): 1596-1600. (in Chinese)) [8] 钱德玲. 具有高抗拔性能的支盘桩在工程中的应用研究[J]. 岩石力学与工程学报, 2003, 22(4):678-682. (QIAN De-ling.Engineering application study of squeezed branch pile with high antipulling behavior[J]. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(4): 678-682. (in Chinese))