Abstract：Due to the impact of surrounding projects such as stacking and excavation, it has become a common problem for metro tunnels to produce large deformations. At present, the means to control tunnel deformation is mainly the bonded steel plate reinforcement method, but the existing researches on the evaluation and analysis of the effect of bonded steel plate reinforcement are not clear. Based on the indoor model tests with the similarity ratio of 1:5, the bearing capacity, load-displacement relationship and structural failure mode of shield tunnels reinforced by the bonded steel plates under different deformation conditions are studied. Furthermore, the effects of bonded steel reinforcement and reasonable reinforcement timing are analyzed. The results show that: (1) When the vertical deformation are 7.4‰D, 15‰D and 20‰D respectively (D is the outer diameter of the tunnel), the bonded steel plate reinforcement is adopted for the tunnel structure. Compared with the original structure, the failure loads of the structure reinforced by the bonded steel plates increase by 54.2%, 49.6% and 26.7% respectively, the vertical deformation at structural instability is 60.78, 58.74 and 62.15 mm respectively, and the horizontal deformation at structural instability is 48.46, 56.28 and 61.68 mm respectively, indicating that the bonded steel plate reinforcement can improve the structural bearing capacity, and it has no great influence on the unstable displacement, thus providing a basis for judging the structural service performance based on the displacement change. (2) It is more reasonable to use as the reinforcement time when the structural deformation is between 10‰D and 15‰D. (3) The cracking and peeling of bonding surface between steel plate and concrete are the main factors for the failure of bonded steel reinforcement structures, and the critical position is the joint near vault. These findings can provide a theoretical basis for the reinforcement design and selection of reinforcement time.
刘学增, 赖浩然, 桑运龙, 段俊铭, 丁爽. 不同变形条件下盾构隧道粘钢加固效果的模型试验研究[J]. 岩土工程学报, 2020, 42(11): 2115-2123.
LIU Xue-zeng, LAI Hao-ran, SANG Yun-long, DUAN Jun-ming, DING Shuang. Model tests on effect of bonded steel plate reinforcement of shield tunnels under different deformation conditions. Chinese J. Geot. Eng., 2020, 42(11): 2115-2123.
[1] 林楠, 李攀, 谢雄耀. 盾构隧道结构病害及其机理研究[J]. 地下空间与工程学报, 2015, 11(增刊2): 802-809. (LIN Nan, LI Pan, XIE Xiong-yao.Research on evolution mechanism of shield tunnel disease based on segment performance analysis[J]. Chinese Journal of Underground Space and Engineering 2015, 11(S2): 802-809. (in Chinese)) [2] 任天宇, 刘树亚, 柳献. 波纹钢板加固盾构隧道衬砌管片抗弯性能试验研究[J]. 隧道建设(中英文), 2019, 39(2): 317-323. (REN Tian-yu, LIU Shu-ya, LIU Xian. experimental study of bending capacity of shield tunnel lining segment strengthened by corrugated steel[J]. Tunnel Construction, 2019, 39(2): 317-323. (in Chinese)) [3] CHANG C T, SUN C W, DUANN S W, et al.Response of a Taipei Rapid Transit System (TRTS) tunnel to adjacent excavation[J]. Tunnelling and Underground Space Technology, 2001, 16(3): 151-158. [4] 罗昭明, 董志超. 地铁盾构隧道管片破损修复技术研究[J]. 人民长江, 2015, 46(24): 59-62, 93. (LUO Zhao-min, DONG Zhi-chao.Research on repairing technique of broken shield segment in metro tunnel excavation[J]. Yangtze River, 2015, 46(24): 59-62, 93. (in Chinese)) [5] ZHAO H, LIU X, BAO Y, et al.Simplified nonlinear simulation of shield tunnel lining reinforced by epoxy bonded steel plates[J]. Tunnelling and Underground Space Technology, 2016, 51: 362-71. [6] 柳献, 唐敏, 鲁亮, 等. 内张钢圈加固盾构隧道结构承载能力的试验研究——整环加固法[J]. 岩石力学与工程学报, 2013, 32(11): 2300-2306. (LIU Xian, TANG Min, LU Liang, et al.Experimental study of ultimate bearing capacity of shield tunnel reinforced by full-ring steel plate[J]. Chinese Journal of Rock Mechanics and Engineering, 2013, 32(11): 2300-2306. (in Chinese)) [7] 刘学增, 赖浩然, 桑运龙, 等. 双侧卸载工况下盾构隧道错缝拼装结构变形特征[J].同济大学学报(自然科学版), 2019, 47(10): 1398-1405. (LIU Xue-zeng, LAI Hao-ran, Sang Yun-long, et al.deformation characteristics of shield tunnel with staggered joints under bilateral unloading condition[J]. Journal of Tongji University (Natural Science), 2019, 47(10): 1398-1405. (in Chinese)) [8] 混凝土结构加固设计规范:GB 50367—2013[S]. 2013. (Code for Design of Strengthening Concrete Structure:GB 50367—2013[S]. 2013. (in Chinese)) [9] 混凝土结构后锚固技术规范:JG 145—2013[S]. 2013. (Technical Specification for—Post Installed Fastenings in Concrete Structures:JG 145—2013[S]. 2013. (in Chinese)) [10] 顾春华. 变形隧道的衬砌结构加固技术[J]. 现代隧道技术, 2014, 51(增刊1). (GU Chun-hua.Reinforcement technique for the deformed tunnel lining[J]. Modern Tunneling Technology, 2014, 51(S1). (in Chinese)) [11] 工程结构加固材料应用安全性鉴定规:GB 50728—2011[S]. 2011. (Technical Code for Safety Appraisal of Engineering Structural Strengthening Materials:GB 50728—2011[S]. 2011. (in Chinese)) [12] 朱瑶宏, 张雨蒙, 夏杨于雨, 等. 通用环错缝拼装隧道极限承载能力足尺试验研究[J]. 现代隧道技术, 2018, 55(06): 152-162+169. (ZHU Hong-yao, ZHANG Yu-meng, XIA Yang-yu-yu, et al. Full-scale test on ultimate bearing capacity of tunnel segment lining with staggered joints[J]. Modern Tunneling Technology, 2018, 55(06): 152-162+169. (in Chinese)) [13] 毕湘利, 柳献, 王秀志, 等. 通缝拼装盾构隧道结构极限承载力的足尺试验研究[J]. 土木工程学报, 2014, 47(10): 118-127. (BI Xiang-li, LIU Xian, WANG Xiu-zhi, et al.Experimental investigation on the ultimate bearing capacity of continuous-jointed segmental tunnel linings[J]. China Civil Engineering Journal, 2014, 47(10): 118-127. (in Chinese)) [14] 城市轨道交通结构安全保护技术规范: DB33/T1139—2017[S]. 2017. (Technical Code for Protection of Urban Rail Transit Structures: DB33/T1139—2017[S]. 2017. (in Chinese))
