Application of UH model to analysis of deformation of embankment on soft soils
FENG Xing1, YAO Yang-ping2, LI Ru-ning3, HUO Hai-feng1
1. School of Airport, Civil Aviation University of China, Tianjin 300300, China; 2. School of Transportation Science and Engineering, Beihang University, Beijing 100191, China; 3. China North Engine Research Institute, Tianjin 300400, China
Abstract:The unified hardening model (UH model) proposed by Yao et al. is the constitutive model which can consider the influence of the complex stress path and stress history on the deformation and strength of clays reasonably. It can describe the characteristics of the normal consolidated clays and the overconsolidated clays well, including stress-strain relationships, shear dilatancy and shrinkage, strain hardening and softening. The initial overconsolidation ratio (OCR) is introduced into the finite element program of UH model. By regarding OCR as the control parameter, the three-dimension finite element analysis of embankment on soft soil with different OCRs is performed by the program. The settling curves with the time, the settlements of each point on the surface of subgrade and the horizontal displacements at vertical points are compared using the UH model and the MCC model. The settlements of subgrade soil deformation are attained. The results of UH model are compared with the measured data, and it is illustrated that the UH model is rational in analyzing the actual embankment engineering on soft soil.
冯兴, 姚仰平, 李汝宁, 霍海峰. UH模型在路堤软基变形分析中的应用[J]. 岩土工程学报, 2017, 39(z2): 25-28.
FENG Xing, YAO Yang-ping, LI Ru-ning, HUO Hai-feng. Application of UH model to analysis of deformation of embankment on soft soils. Chinese J. Geot. Eng., 2017, 39(z2): 25-28.
[1] HUANG W X, FITYUS S, BISHOP D, et al. Finite-Element parametric study of the consolidation behavior of a trial embankment on soft clay[J]. International Journal of Geomechanics, 2006, 6(5): 1-14. [2] OLIVEIRA P J V, LEMOS L J L. Numerical analysis of an embankment on soft soils considering large displacements[J]. Computers and Geotechnics, 2011, 38: 88-93. [3] 孙德安, 甄文战, 黄文雄. 三维弹塑性模型在路堤软基固结分析中应用[J]. 岩土力学, 2009, 30(3): 669-674. (SUN De-an, ZHEN Wen-zhan, HUANG Wen-xiong. Application of 3D elastoplastic model to analysis of consolidation behavior of embankment on soft soils[J]. Rock and Soil Mechanics, 2009, 30(3): 669-674. (in Chinese)) [4] YAO Yang-ping, HOU Wei, ZHOU An-nan. UH model: three-dimensional unified hardening model for overconsolidated clays[J]. Géotechnique, 2009, 59(5): 451-469. [5] 姚仰平. UH模型系列研究[J]. 岩土工程学报, 2015, 37(2): 193-217. (YAO Yang-ping. Advanced UH models for soils[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(2): 193-217. (in Chinese)) [6] 姚仰平, 冯 兴, 黄 祥, 等. UH模型在有限元分析中的应用[J]. 岩土力学, 2010, 31(1): 237-245. (YAO Yang-ping, FENG Xing, HUANG Xiang, et al. Application of UH model to finite element analysis[J]. Rock and Soil Mechanics, 2010, 31(1): 237-245. (in Chinese)) [7] 冯 兴, 姚仰平, 李春亮, 等. UH模型在双层地基受力变形分析中的应用[J]. 岩土工程学报, 2012, 34(5): 805-811. (FENG Xing, YAO Yang-ping, LI Chun-liang, et al. Application of UH model to analysis of deformation of double-layer subgrade[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(5): 805-811. (in Chinese)) [8] 罗 汀, 秦振华, 姚仰平, 等. UH模型切线刚度矩阵对称化及其应用[J]. 力学学报, 2011, 43(6): 1186-1190. (LUO Ting, QIN Zhen-hua, YAO Yang-ping, et al. Symmetrization and applications of tangent stiffness matrix for UH model[J]. Chinese Journal of Theoretical and Mechanics, 2011, 43(6): 1186-1190. (in Chinese))