Damage and control mechanism of thick and hard floor of large chamber in deep mines
WANG Shu-li1, ZHANG Kai-zhi2, JIANG Jin-quan3, XIA Jun-min3, ZHU Guang-li1
1. College of Mining and Safety Engineering, Shandong University of Science and Technology, Qingdao 266590, China; 2. Institute of Mining Engineering, Guizhou Institute of Technology, Guiyang 550003, China; 3. State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and Ministry of Science and Technology, Shandong University of Science and Technology, Tai'an 271002, China
Abstract:Aiming at the floor heave problem of thick and hard floor of large chamber in deep mines the winch room in Tangkou Mine about a kilometer in depth is taken as an engineering case, and the damage mechanism of thick and hard floor is studied. In early excavation, the floor sustains obvious layered damage by buckling and then slides and moves along damage fracture surface under the action of high ground stress. The critical load for damage by buckling is derived based on buckling theory of thin plate. For controlling the damage by buckling of floor, based on the principle of strength and control of the whole floor, the technology of composite piles and foundation of thick and hard floor in large chamber is proposed as follows: based on inverted arch and combined transverse steel beams and chained double reinforcing meshes, concrete is poured to form strong foundation beam so as to balance the force and prevent stress concentration of floor. The combined anchor wires and high-pressure grouting are used to form composite piles to block the floor stress to transfer from the surrounding rock and to balance the stress. Finally composite piles and foundation are formed, and the efficiency of engineering application is satisfactory. The research may be helpful to controlling large chambers in deep mines and large underground spaces.
王树立, 张开智, 蒋金泉, 夏均民, 朱光丽. 深井大型硐室厚坚硬底板破坏机理及控制技术[J]. 岩土工程学报, 2016, 38(7): 1316-1323.
WANG Shu-li, ZHANG Kai-zhi, JIANG Jin-quan, XIA Jun-min, ZHU Guang-li. Damage and control mechanism of thick and hard floor of large chamber in deep mines. Chinese J. Geot. Eng., 2016, 38(7): 1316-1323.
[1] 何满潮, 谢和平, 彭苏萍, 等. 深部开采岩体力学研究[J]. 岩石力学与工程学报, 2005, 24(16): 2803-2814. (HE Man-chao, XIE He-ping, PENG Su-ping, et al. Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(16): 2803-2814. (in Chinese)) [2] 贺永年, 韩立军, 邵 鹏, 等. 深部巷道稳定的若干岩石力学问题[J]. 岩石力学与工程学报, 2006, 25(3): 288-295. (HE Yong-nian, HAN Li-jun, SHAO Peng, et al. Some problems of rock mechanics for roadways stability in depth[J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(3): 288-295. (in Chinese)) [3] 柏建彪, 李文峰, 王襄禹, 等. 采动巷道底鼓机理与控制技术[J]. 采矿与安全工程学报, 2011, 28(1): 1-5. (BAI Jian-biao, LI Wen-feng, WANG Xiang-yu, et al. Mechanism of floor heave and control technology of roadway induced by mining [J]. Journal of Mining & Safety Engineering, 2011, 28(1): 1-5. (in Chinese)) [4] 阚甲广, 张 农, 李桂臣, 等. 泥化巷道底板控制技术研究[J]. 采矿与安全工程学报, 2011, 28(3): 356-360. (KAN Jia-guang, ZHANG Nong, LI Gui-chen, et al.Floor con- trolling technology of argillization roadway[J]. Journal of Mining & Safety Engineering, 2011, 28(3): 356-360. (in Chinese)) [5] 安智海, 张 农, 倪建明, 等. 朱仙庄煤矿松软破碎岩层巷道底鼓控制技术[J]. 采矿与安全工程学报, 2008, 25(3): 263-267. (AN Zhi-hai, ZHANG Nong, NI Jian-ming, et al. Floor heave control technique for broken soft rock roadway in zhu xianzhuang mine[J]. Journal of Mining & Safety Engineering, 2008, 25(3): 263-267. (in Chinese)) [6] 何满潮. 深部软岩工程的研究进展与挑战[J]. 煤炭学报, 2014, 39(8): 1409-1417. (HE Man-chao. Program and challenges of soft rock engineering in depth[J]. Journal of China Coal Society, 2014, 39(8): 1409-1417. (in Chinese)) [7] 姜耀东, 王宏伟,赵毅鑫, 等. 极软岩回采巷道互补控制支护技术研究[J]. 岩石力学与工程学报, 2009, 28(12): 2383-2390. (JIANG Yao-dong, WANG Hong-wei, ZHAO Yi-xin, et al. Study of complementary supporting technology of extremely soft rock mining roadway[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(12): 2383-2390. (in Chinese)) [8] 张开智, 夏均民, 蒋金泉. 软岩锚杆强壳体支护结构及合理参数研究[J]. 岩石力学与工程学报, 2004, 23(4): 668-672. (ZHANG Kai-zhi, XIA Jun-min, JIANG Jin-quan. Structure and application of strong shell-body support in soft rock roadway[J]. Chinese Journal of Rock Mechanics and Engineering, 2004, 23(4): 668-672. (in Chinese)) [9] 樊克恭, 蒋金泉. 弱结构巷道围岩变形破坏与非均称控制机理[J]. 中国矿业大学学报, 2007, 36(1): 54-59. (FAN Ke-gong, JIANG Jin-quan. Deformation failure and non- harmonious control mechanism of surrounding rocks of roadways with weak structures[J]. Journal of China University of Mining &Technology, 2007, 36(1): 54-59. (in Chinese)) [10] 王卫军, 冯 涛. 加固两帮控制深井巷道底鼓的机理研究[J]. 岩石力学与工程学报, 2005, 24(5): 808-811. (WANG Wei-jun, FENG Tao. Study on mechanism of reinforcing sides to control floor heave of extraction opening[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(5): 808-811. (in Chinese)) [11] 李学华, 黄志增, 杨宏敏, 等. 高应力硐室底鼓控制的应力转移技术[J]. 中国矿业大学学报, 2006, 35(3): 296-300. (LI Xue-hua, HUANG Zhi-zeng, YANG Hong-min, et al. Stress transfer technique of controlling chambers floor heave under high mining stress[J]. Journal of China University of Mining & Technology, 2006, 35(3): 296-300. (in Chinese)) [12] 柏建彪, 侯朝炯. 深部巷道围岩控制原理与应用研究[J]. 中国矿业大学学报, 2006, 35(2): 145-148. (BAI Jian-biao, HOU Chao-jiong. Control principle of surrounding rocks in deep roadway and it’s application[J]. Journal of China University of Mining & Technology, 2006, 35(2): 145-148. (in Chinese)) [13] 牛双建, 靖洪文, 张忠宇, 等. 深部软岩巷道围岩稳定控制技术研究及应用[J]. 煤炭学报, 2011, 36(6): 914-919. (NIU Shuang-jian, JIGN Hong-wen, ZHANG Zhong-yu, et al. Study on control technology of surrounding rocks in deep soft roadway and its application[J]. Journal of China Coal Society, 2011, 36(6): 914-919. (in Chinese)) [14] 陈明祥. 弹塑性力学[M]. 北京: 科学出版社, 2007. (CHEN Ming-xiang. Elastic-plastic mechanics[M]. Beijing: Science Press, 2007. (in Chinese)) [15] 何福保, 沈亚鹏. 板壳理论[M]. 西安: 西安交通大学出版社, 1993. (HE Fu-bao, SHEN Ya-peng. Theory of plate and shell[M]. Xi'an: Xi'an Jiaotong University Press, 1993. (in Chinese)) [16] 刘泉声, 刘学伟, 黄 兴, 等. 深井软岩破碎巷道底臌原因及处置技术研究[J]. 煤炭学报, 2013, 38(4): 566-571. (LIU Quan-sheng, LIU Xue-wei, HUANG Xing, et al. Research on the floor heave reasons and supporting measures of deep soft-fractured rock roadway[J]. Journal of China Coal Society, 2013, 38(4): 566-571. (in Chinese)) [17] 赵明华. 土力学与基础工程[M]. 武汉: 武汉工业大学出版社, 2000. (ZHAO Ming-hua. Soil mechanics and foundation engineering[M]. Wuhan: Wuhan University of Technology Press, 2000. (in Chinese)) [18] 杨本生, 高 斌, 孙利辉, 等. 深井软岩巷道连续“双壳”治理底鼓机理与技术[J]. 采矿与安全工程学报, 2014, 31(4): 587-592. (YANG Ben-sheng, GAO Bin, SUN Li-hui, et al. Study on technology and mechanism of continuous “double shell” harnessing floor heave in deep soft-engineering rock roadway[J]. Journal of Mining & Safety Engineering, 2014, 31(4): 587-592. (in Chinese)) [19] 王连国, 李明远, 王学知. 深部高应力极软岩巷道锚注支护技术研究[J]. 岩石力学与工程学报, 2005, 24(16): 2889-2893. (WANG Lian-guo, LI Ming-yuan, WANG Xue-zhi. Study on mechanisms and technology for bolting and grouting in special soft rock roadways under high stress[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(16): 2889-2893. (in Chinese)) [20] 乔卫国, 孟庆彬, 林登阁, 等. 深部软岩巷道锚注联合支护技术研究[J]. 西安科技大学学报, 2011, 31(1): 22-27. (QIAO Wei-guo, MENG Qing-bin, LIN Deng-ge, et al. Research and case analysis of bolting-grouting combined support technology in deep soft-rock roadway[J]. Journal of Xi'an University of Science and Technology, 2011, 31(1): 22-27. (in Chinese)) [21] 郑朋强, 陈卫忠, 谭贤君, 等. 软岩大变形巷道底臌破坏机制与支护技术研究[J]. 岩石力学与工程学报, 2015, 34(增刊1): 3143-3150. (ZHENG Peng-qiang, CHEN Wei-zhong, TAN Xian-jun, et al. Study of failure mechanism of floor heave and supporting technology in soft rock of large deformation roadway[J]. Chinese Journal of Rock Mechanics and Engineering, 2015, 34(S1): 3143-3150. (in Chinese))