New method for dynamic analysis of rock slope stability based on modal parameters
DU Yan1, 2, XIE Mo-wen1, LÜ Fu-xia1, WANG Zeng-fu3, WANG Gui-jie4, LIU Qiu-qiang4
1. School of Civil and Environmental Engineering, University of Science & Technology Beijing, Beijing 100083, China; 2. Faculty of Engineering, Nagasaki University, Nagasaki 852-8521, Japan; 3. Beijing Urben Construction Exploration & Surveying Design Research Institute Co., Ltd., Beijing 100101, China; 4. China Institute of Geo-Environment Monitoring, Beijing 100081, China
Abstract:The slope stability analysis is a focal problem in the geotechnical engineering field. However, few dynamic stability analyses are made based on the ever-changing modal parameters. Therefore, the cohesion in key regions is taken as the dynamic parameter so as to realize the dynamic stability analysis of the slope. By using GIS (geographic information systems) 3D slope stability analysis models, the cohesion can be adjusted by real-time data of natural vibration frequencies in order to make the strength reduction method more real and effective. The establishment of the inherent relationship between the vibration frequency and the cohesion of landslide can effectively solve the difficulty of selection and adjustment of the parameter in numerical analysis. The experimental results show that the dynamic stability analysis based on the variation of modal parameters makes full use of the objective advantages of strength reduction and avoids the subjective disadvantages of the limit equilibrium method. Thus, the simulated results are more close to the actual conditions. Furthermore, this new method can take into full account the slope space features and allow an objective evaluation of the strength retrogression, so it is reliable for slope stability analysis.
杜岩, 谢谟文, 吕夫侠, 王增福, 王桂杰, 刘秋强. 基于模态参量变化的边坡动态稳定分析新方法[J]. 岩土工程学报, 2015, 37(7): 1334-1339.
DU Yan, XIE Mo-wen, LÜ Fu-xia, WANG Zeng-fu, WANG Gui-jie, LIU Qiu-qiang. New method for dynamic analysis of rock slope stability based on modal parameters. Chinese J. Geot. Eng., 2015, 37(7): 1334-1339.
[1] 崔政权, 李 宁. 边坡工程: 理论与实践最新发展[M]. 北京: 中国水利水电出版社, 1999. (CUI Zheng-quan, LI Ning. Slope engineering: the latest development of theory and practice[M]. Beijing:China Water Power Press,1999. (in Chinese)) [2] 巫德斌. 层状岩体边坡工程力学参数研究[D]. 南京: 河海大学, 2005. (WU De-bin. Study on mechanical parameter of bedded rock mass slope engineering[D]. Nanjing: Hohai University, 2005. (in Chinese)) [3] STEAD D, EBERHARDT E, COGGAN J S. Developments in the characterization of complex rock slope deformation and failure using numerical modelling techniques[J]. Engineering Geology, 2006, 83(1): 217-235. [4] 赵尚毅, 郑颖人, 时卫民, 等. 用有限元强度折减法求边坡稳定安全系数[J]. 岩土工程学报, 2002, 24(3): 343-346. (ZHAO Shang-yi, ZHENG Ying-ren, SHI Wei-min, et al. Analysis of safety factor of slope stability by strength reduction FEM[J]. Chinese Journal of Geotechnical Engineering, 2002, 24(3): 343-346. (in Chinese)) [5] 杨光华, 张玉成, 张有祥. 变模量弹塑性强度折减法及其在边坡稳定分析中的应用[J]. 岩石力学与工程学报, 2009, 28(7): 1506-1512. (YANG Guang-hua, ZHANG Yu-cheng, ZHANG You-xiang. Variable modulus elastoplastic strength reduction method and its application to slope stability analysis[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(7): 1506-1512. (in Chinese)) [6] 钟志辉, 杨光华, 张玉成, 等. 基于局部强度折减法的土质边坡位移研究[J]. 岩土工程学报, 2011, 33(增刊1): 196-201. (ZHONG Zhi-hui, YANG Guang-hua, ZHANG Yu-cheng, et al. Displacement of soil slopes based on local strength reduction method[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(S1): 196-201. (in Chinese)) [7] MA G, SAWADA K, YASHIMA A, et al. Experimental study of the applicability of the remotely positioned laser doppler vibrometer to Rock-Block stability assessment[J]. Rock Mechanics and Rock Engineering, 2015, 48(2): 787-802. [8] 谢谟文, 蔡美峰. 信息边坡工程学的理论与实践[M]. 北京: 科学出版社, 2005. (XIE Mo-wen, CAI Mei-feng. Theory and practice of informational slope engineering[M]. Beijing: Science Press, 2005. (in Chinese)) [9] 杜 岩, 谢谟文, 蒋宇静,等. 基于固有振动频率的监测预警指标确定方法[J]. 岩土力学(待刊). (DU Yan, XIE Mo-wen, JIANG Yu-jing, et al. Methods of determining warning indicators based on predominant frequency monitor[J]. Rock and Soil Mechanics (in press). (in Chinese)) [10] EBERHARDT E. Twenty-ninth Canadian Geotechnical Colloquium: The role of advanced numerical methods and geotechnical field measurements in understanding complex deep-seated rock slope failure mechanisms[J]. Canadian Geotechnical Journal, 2008, 45(4): 484-510. [11] FARRAR C R, DOEBLING S W. An overview of modal-based damage identification methods[C]// Proceedings of DAMAS conference. Los Alamos, 1997. [12] 冯树仁, 丰定祥. 边坡稳定性的三维极限平衡分析方法及应用[J]. 岩土工程学报, 1999, 21(6): 657-661. (FENG Shu-ren, FENG Ding-xiang. 3D limit equilibrium method for slope stability and its application[J]. Chinese Jounal of Geotechnical Engineering, 1999, 21(6): 657-661. (in Chinese)) [13] ZOU Z, LINK M. Identification of delamination in composite laminated plates using vibration test data[C]// Proceedings of International Conference on Structural Dynamics, Vibration, Noise and Control. Hong Kong, 1995. [14] DOEBLING S W, FARRAR C R, PRIME M B, et al. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review[R]. Los Alamos: Los Alamos National Laboratory, 1996. [15] JIANG Y, GAO Y, LI B. Research on health assessment technique of tunnel lining based on power spectrum density characteristics of microtremors[J]. Journal of Japan Society of Civil Engineers, 2012, 68(3): 111-118. [16] CUNHA Á, CAETANO E. Experimental modal analysis of civil engineering structures[J]. Sound and Vibration, 2006, 40(6): 12-20. [17] UEHAN F, SAITO H, MA G. Fundamental study on the remote vibration measuring system for Evaluating Rock Slope Stability[C]// 15th World Conference on Earthquake Engineering. Lisbon, 2012.