Abstract：The applicability of drilled screw pile in Shanghai soft soils is proved by the Expo Village (Block Ⅰ) project. Firstly, two design schemes, i.e., traditional drilled pile and drilled screw pile, are put forward according to the existing construction conditions. The bearing capacities of the two types of piles are predicted using the existing calculation methods. The predicted results show that the ultimate capacity of the drilled screw pile is 1.47 times larger than that of the traditional drilled pile. Then low-strain dynamic tests and static load tests are conducted on this type of pile. The result of the low-strain dynamic tests shows that the pile quality of the drilled screw pile is very reliable in Shanghai soft soils. The results of the static load tests demonstrate that the designed drilled screw pile has a high bearing capacity which is close to the predicted value, and the accuracy of the proposed method is validated. Finally by the scheme comparison, the drilled screw pile is chosen as the engineering pile of this project, and its application effect is good.
[1] 吴 敏, 李波扬. 全螺旋灌注桩-全螺纹钻（挤）孔灌注桩竖向承载力初探[J]. 武汉大学学报(工学版), 2002, 35(5): 109-112. (WU Min, LI Bo-yang. Primary discussion on vertical load bearing capacity of screwed filling piles[J]. Engineering Journal of Wuhan University, 2002, 35(5): 109-112. (in Chinese)) [2] 孙文怀, 张元冬, 魏厚峰. 全螺纹钻（挤）孔灌注桩在软弱地层中的应用[J]. 华北水利水电学院学报, 2009, 30(3): 74-76. (SUN Wen-huai, ZHANG Yuan-dong, WEI Hou-feng. Application of screw pile in weak strata[J]. Journal of North China Institute of Water Conservancy and Hydroelectric Power, 2009, 30(3): 74-76. (in Chinese)) [3] 李成巍, 陈锦剑, 吴 琼, 等. 灌注全螺纹钻（挤）孔灌注桩承载机理与计算方法[J]. 上海交通大学学报, 2010, 44(6): 726-730. (LI Cheng-wei, CHEN Jin-jian, WU Qiong, et al. Bearing mechanism and calculation method of screw pile[J]. Journal of Shanghai Jiaotong University, 2010, 44(6): 726-730. (in Chinese)) [4] 孟 振, 陈锦剑, 王建华, 等. 砂土中全螺纹钻（挤）孔灌注桩承载特性的模型试验研究[J]. 岩土力学, 2012, 33(增1): 141-145. (MENG Zhen, CHEN Jin-jian, WANG Jian-hua, et al. Study of model test on the bearing capacity of screw piles in sand[J]. Rock and Soil Mechanics, 2012, 33(S1): 141-145. (in Chinese)) [5] DGJ 08—11—2010上海地基基础设计规范[S]. 上海, 2010. (DGJ08—11—2010 Code for foundation design[S]. shanghai, 2010. (in Chinese)) [6] JGJ 94—2008 建筑桩基技术规范[S]. 上海, 2010. (JGJ 94—2008 Technical code for building foundation pile[S]. Shanghai, 2010. (in Chinese)) [7] 王京汉, 黎光明. 全螺纹钻（挤）孔灌注桩桩基承载力静载与高应变检测对比分析[J]. 工程建设, 2007, 39(1): 14-17. (WANG Jing-han, LI Guang-ming. Analysis of comparing static loading test with dynamic high strain testing for screw pile foundation[J]. Engineering construction, 2007, 39(1): 14-17. (in Chinese)) [8] JGJ 106—2003 建筑桩基检测技术规范[S]. 北京: 中国建筑工业出版社, 2003. (JGJ106-2003 Technical code for testing of building foundation pile[S]. Beijing: China Architecture and Building Press, 2003. (in Chinese))
