基于破碎能耗的粗颗粒料本构模型

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1068 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要现有的考虑颗粒破碎的本构模型主要是通过引入颗粒破碎率来反映颗粒破碎对材料力学性质的影响，由于颗粒破碎率只是粗颗粒料在受外荷作用下的一种外部表现，在测定的其它参数中实际上已经包含了颗粒破碎的影响，因此为反映颗粒破碎而引入颗粒破碎率的方法是不合适的。基于Ueng和Chen剪胀方程，通过分析三轴剪切试验过程中的能量平衡，提出了考虑颗粒破碎的剪胀方程及其参数确定方法。将Rowe剪胀方程和考虑颗粒破碎的剪胀方程分别引入Duncan E-非线性模型和沈珠江“南水”双曲服面模型，通过与三轴CD剪切试验成果的对比分析和工程实例的有限元数值分析，表明所提模型可较好地反映材料的剪胀特性。如采用弹塑性模型尚能反映颗粒破碎在增加变形的同时降低了材料的强度等特性，验证了所提模型的合理性和可靠性。与现有的考虑颗粒破碎的本构模型相比，所提模型具有试验工作量小、参数少和参数物理意义明确等优点，便于在工程中推广使用。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	米占宽
	李国英
	陈生水

关键词 ：粗颗粒料, 颗粒破碎, 破碎能耗, 本构模型

Abstract：The existing constitutive models incorporating particle breakage mainly introduce the particle breakage index to reflect the influences of the particle breakage on the mechanical properties of coarse granular materials. Because of the external display of the particle breakage index of coarse particles under external load, the measured parameters actually include the influences of the particle breakage, and the methods for the particle breakage into which by introducing the particle breakage index are not suitable. Based on the Ueng’s and Chen’s dilatancy formulae, the dilatancy equation considering the particle breakage and the relevant methods for its parameters are proposed by analyzing the energy equilibrium problems in the process of triaxial CD tests. The Rowe’s dilatancy formula and the proposed dilatancy equation considering the particle breakage are respectively introduced into the Duncan-Chang E- model and the NHRI double-yield face model by Shen Zhujiang. Through the comparison with the results of triaxial CD tests and the finite element numerical analysis of a case study, it is shown that the proposed model can satisfactorily reflect the dilatancy properties of the materials, for example, the elastoplastic model may depict the increase of the deformation and simultaneously the decrease of the strength of the materials during the particle breakage. The rationality and reliability of the proposed model are thus validated. Compared with the existing constitutive models considering the particle breakage, the proposed model has the advantages of small test workload, few parameters and clear significance of parameters, etc., and it is convenient to be popularized in projects.

Key words： coarse granular material particle breakage breakage energy constitutive model

收稿日期: 2011-09-15

TU443

作者简介: 米占宽(1973– )，男，博士，高级工程师。主要从事岩土工程试验和数值计算方面的研究。

引用本文:

米占宽, 李国英, 陈生水. 基于破碎能耗的粗颗粒料本构模型[J]. 岩土工程学报, 2012, 34(10): 1801-1811. MI Zhan-kuan, LI Guo-ying, CHEN Sheng-shui. Constitutive model for coarse granular materials based on breakage energy. Chinese J. Geot. Eng., 2012, 34(10): 1801-1811.

链接本文:

http://manu31.magtech.com.cn/Jwk_ytgcxb/CN/ 或 http://manu31.magtech.com.cn/Jwk_ytgcxb/CN/Y2012/V34/I10/1801

[1] UENG T S, CHEN T J. Energy aspects of particle breakage in drained shear of sands[J]. Géotechnique, 2000, 50(1): 65–72.
[2] SALIM W, INDRARATNA B. A new elastoplastic constitutive model for coarse granular aggregates incorporating particle breakage[J]. Canadian Geotechnical Journal, 2004, 41(4): 657–671.
[3] 贾宇峰. 考虑颗粒破碎的粗粒土本构关系研究[D]. 大连:大连理工大学, 2008. (JIA Yu-feng. Coarse granular soil constitutive model incorporating particle breakage[D]. Dalian: Dalian University of Technology, 2008. (in Chinese))
[4] MIURA N, O’HARA S. Particle-crushing of a decomposed granite soil under shear stresses[J]. Soils and Foundation, 1979, 19(3): 1–14.
[5] MCDOWELL G R. The role of particle crushing in granular materials[M]// Modern Trends in Geomechanics, Vienna, Austria, 2005.
[6] SIMONINI P. Analysis of behavior of sand surrounding pile tips[J]. Journal of Geotecnical Engineering, 1996, 53(10): 898–905.
[7] DAOUADJI A, HICHER P Y, RAHMA A. An elastoplastic model for granular materials taking into account grain breakage[J]. European Journal of Mechanics A-Solids, 2001, 20(1): 113–117.
[8] 米占宽, 李国英, 陈铁林. 考虑颗粒破碎的堆石体本构模型[J]. 岩土工程学报, 2007, 29(12): 1865–1869. (MI Zhan-kuan, LI Guo-ying, CHEN Tie-lin. Constitutive model for rockfill material consdering grain crushing[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(12): 1865–1869. (in Chinese))
[9] EINAV I. Breakage mechanics-Part II: Modelling granular materials[J]. Journal of the Mechanics and Physics of Solids, 2007, 55(6): 1298–1320.
[10] DESAI C S. Mechanics of materials and interfaces: The disturbed state concept[M]. Florida: CRC Press, Boca Raton, 2001.
[11] VARADARAJAN A, SHARMA K G, VENKATACHALAM K, et al. Testing and modeling two rockfill materials[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2003, 129(3): 206–218.
[12] MARSAL R J. Large scale testing of rockfill materials[J]. Journal of the Soil Mechanics and Foundations Division, ASCE, 1967, 93(SM2):27–43.
[13] LEE K L, FARHOOMAND I. Compressibility and crushing of granular soil in anisotropic triaxial compression[J]. Canadian Geotechnical Journal, 1967, 4(1): 68–86.
[14] HARDIN B O. Crushing of soil particles[J]. Journal of Geotechnical Engineering, 1985, 111(10): 1177–1192.
[15] LADE P V, YAMAMURO J A, BOPP P A. Significance of particle crushing in granular materials[J]. Journal of Geotechnical Engineering, ASCE, 1996, 122(4): 309–316.
[16] 刘恩龙, 陈生水, 李国英, 等. 堆石料的临界状态与考虑颗粒破碎的本构模型[J]. 岩土力学, 2011, 32(增刊2): 148–154. (LIU En-long, CHEN Sheng-shui, LI Guo-ying, et al. Critical state of rockfill materials and a constitutive model considering grain crushing[J]. Rock and Soil Mechanics, 2011, 32(S2): 148–154. (in Chinese))
[17] ROWE P W. The stress-dilatancy relation for static equilibrium of an assembly of particles in contact[J]. Proceedings of the Royal Society of London, 1962(A), 269: 500–527.
[18] MODONI G, KOSEKI J, ANH DAN L Q. Cyclic stress–strain response of compacted gravel[J]. Géotechnique, 2011, 61(6): 473–485.
[19] PREVOST J H, HOEG K. Soil mechanics and plasticity analysis of strain softening[J]. Géotechnique, 1975, 25(2): 279–297.
[20] 米占宽. 考虑颗粒破碎的粗颗粒料本构模型[D]. 南京: 南京水利科学研究院, 2011. (MI Zhan-kuan. A constitutive model for coarse granular materials incorporating particle breakage[D]. Nanjing: Nanjing Hydraulic Research Institute, 2011. (in Chinese))
[21] WOOD D M, BELKHEIR K., LIU D F. Strain softening and state parameter for sand modelling[J]. Géotechnique, 1994, 44(2): 335–339.
[22] MAHMOUD H, HOSEIN S, HABIB S. Dilation and particle breakage effects on the shear strength of calcareous sands based on energy aspects[J]. International Journal of Civil Engineerng, 2008, 6(2): 108–119.
[23] 魏松. 粗粒料浸水湿化变形特性试验及其数值模型研究[D]. 南京: 河海大学, 2006. (WEI Song. Study on wetting deformation behaviour and numerical model of coarse-grained materials[D]. Nanjing: Hohai University, 2006. (in Chinese))
[24] 申存科, 迟世春, 贾宇峰. 考虑颗粒破碎影响的粗粒土本构关系[J]. 岩土力学, 2010,31(7): 2111–-2115. (SHEN Cun-ke, CHI Shi-chun, JIA Yu-feng. A constitutive model for coarse granular soil incorporating particle breakage[J]. Rock and Soil Mechanics, 2010, 31(7): 2111–2115. (in Chinese))
[25] 朱百里, 沈珠江. 计算土力学[M]. 上海: 上海科学技术出版社, 1990: 58–59. (ZHU Bai-li, SHEN Zhu-jiang. Computation soil mechanics[M]. Shanghai: Shanghai Science and Technology Press, 1990. 58–59. (in Chinese))
[26] BAGHERZADEH Kh A, MIRGHASEMI A A, MOHAMMADI S. Numerical simulation of particle breakage of angular particles using combined DEM and FEM [J]. Powder Technology, 2011, 205(1-3): 15–29.
[27] WON Myoung-Soo, KIM You-Seong. A case study on the post-construction deformation of concrete face rockfill dams[J]. Canadian Geotechnical Journal, 2008,45(6): 845–852.