Numerical simulation of grillage flexible supporting structure with prestressed anchors for an excavation
ZHOU Yong1, 2, ZHU Yan-peng1, 2
(1. Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology, Lanzhou 730050, China; 2. Western Engineering Research Center of Disaster Mitigation in Civil Engineering of Ministry of Education, Lanzhou University of Technology, Lanzhou 730050, China)
Abstract：Grillage flexible supporting structure with prestressed anchors is commonly adopted in the projects of deep excavation, but there is no report for its numerical simulation analysis till today. Based on an engineering example, by using the FEM software ADINA and choosing reasonable constitutive models, the numerical simulation for grillage flexible supporting structure with prestressed anchors for an excavation is performed. The results show that the final maximum horizontal displacement appears at the top of excavation, and the prestress values as well as the action positions of the prestressed anchors have significant influences on the horizontal displacement of wall facing. With the increase of excavation depth, the ground surface settlement and the bottom uplift of excavation increase at the same time. The axial forces of anchors increase with the increase of excavation depth, which are on curve distribution along the length direction. The connection line of the points of the maximum axial forces is similar to the slipping surface curve of excavation, and the maximum values of the axial forces of anchors appear bow-shaped distribution along the direction of excavation depth. The numerical simulation shows that the grillage flexible supporting structure with prestressed anchors has obvious effect on the deformation control for deep excavation, and it is worthy of further promotion and application.
[1] 贾金青, 陈国周, 孟祥波. 改进的杆系有限元在预应力锚杆柔性支护法中应用[J]. 岩土力学, 2007, 28(11): 2314–2318. (JIA Jin-qing, CHEN Guo-zhou, MENG Xiang-bo. Application of modified beam-spring FEM to prestressed anchor flexible retaining wall[J]. Rock and Soil Mechanics, 2007, 28(11): 2314–2318. (in Chinese))[2] 秦四清, 贾 洪, 马 平, 等. 预应力土钉支护结构变形与破坏的数值分析[J]. 岩土力学, 2005, 26(9): 1356–1362. (QIN Si-qing, JIA Hong, MA Ping, et al. Numerical analysis of deformation and failure in Prestressed soil-nailed reinforcement structure[J]. Rock and Soil Mechanics, 2005, 26(9): 1356–1362. (in Chinese))[3] 董 诚, 郑颖人, 陈新颖, 等. 深基坑土钉和预应力锚杆复合支护方式的探讨[J]. 岩土力学, 2009, 30(12): 3793–3796, 3802. (DONG Cheng, ZHENG Ying-ren, CHEN Xin-ying, et al. Research on composite support pattern of soil nails and prestressed anchors in deep foundation pits[J]. Rock and Soil Mechanics, 2009, 30(12): 3793–3796, 3802. (in Chinese))[4] 周 勇, 朱彦鹏. 框架预应力锚杆柔性支护结构坡面水平位移影响因素[J]. 岩土工程学报, 2011, 33(3): 470–476. (ZHOU Yong, ZHU Yan-peng. Influencing factors of horizontal displacement of wall facing of grillage flexible supporting structure with prestressed anchors[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(3): 470–476. (in Chinese))[5] 贾金青, 郑卫锋, 陈国周. 预应力锚杆柔性支护技术的数值分析[J]. 岩石力学与工程学报, 2005, 24(21): 3978–3982. (JIA Jin-qing, ZHENG Wei-feng, CHEN Guo-zhou. Numerical analysis of prestressed anchor flexible retaining method[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(21): 3978–3982. (in Chinese))[6] 伍 俊, 郑全平, 吴祥云. 复合土钉支护技术的有限元数值模拟及工程应用[J]. 岩土工程学报, 2005, 27(4): 388–392. (WU Jun, ZHENG Quan-ping, WU Xiang-yun. Numerical simulation in finite element and engineering application of compound soil nail support technology[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(4): 388–392. (in Chinese))[7] 周 勇, 朱彦鹏. 预应力锚杆柔性支护体系的锚杆抗拔力研究[J]. 岩土力学, 2012, 33(2): 415–421. (ZHOU Yong, ZHU Yan-peng. Research on anti-pulling force of anchor of flexible supporting system with prestressed anchors[J]. Rock and Soil Mechanics, 2012, 33(2): 415–421. (in Chinese))[8] 周 勇, 朱彦鹏. 框架预应力锚杆边坡支护结构的稳定性分析方法及其应用[J]. 工程地质学报, 2008, 16(3): 376–382. (ZHOU Yong, ZHU Yan-peng. Stability analysis method for prestressed anchor and grillage supporting structures and its application[J]. Journal of Engineering Geology, 2008, 16(3): 376–382. (in Chinese))[9] 周 勇, 朱彦鹏, 叶帅华. 框架预应力锚杆柔性边坡支护结构设计和施工中的若干问题探讨[J]. 岩土力学, 2011, 32(增刊2): 437–443. (ZHOU Yong, ZHU Yan-peng, YE Shuai-hua. Discussion on several issues about the design and construction of grillage flexible slope supporting structure with prestressed anchors[J]. Rock and Soil Mechanics, 2011, 32(S2): 437–443. (in Chinese))[10] 叶帅华, 朱彦鹏, 周 勇. 兰州市某复杂深基坑工程设计与监测分析[J]. 岩土工程学报, 2011, 33(增刊1): 431–437. (YE Shuai-hua, ZHU Yan-peng, ZHOU Yong. Design and monitoring analysis of a complicated deep foundation pit in Lanzhou[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(S1): 431–437. (in Chinese))[11] 贾金青, 郑卫锋. 预应力锚杆柔性支护法的研究与应用[J]. 岩土工程学报, 2005, 27(11): 1257–1261. (JIA Jin-qing, ZHENG Wei-feng. Study and application of flexible retaining method with prestressed anchor[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(11): 1257–1261. (in Chinese))[12] 郭红仙. 考虑施工过程的土钉支护分析方法研究[D]. 北京: 清华大学, 2006. (GUO Hong-xian. Research on a new analysis method for soil nailing considering the construction process[D]. Beijing: Tsinghua University, 2006. (in Chinese))[13] 周 勇. 框架预应力锚杆柔性支护结构的理论分析与试验研究[D]. 兰州: 兰州理工大学, 2007. (ZHOU Yong. Theoretical analysis and testing study for grillage flexible supporting structure with prestressed anchors[D]. Lanzhou: Lanzhou University of Technology, 2007. (in Chinese))
